Template:BSoD

From Uncyclopedia, the content-free encyclopedia
Jump to navigation Jump to search


This is a template designed to display a Blue Screen of Death without an image and therefore it also optimizes support for screen readers reading it.

Note: The no-image Windows NT BSoD is currently a work-in-progress. The original image is available at [1].

NT 9x 2k XP
01

STOP: 0x00000019 (0x00000000,0xC00E0FF0,0xFFFFEFD4,0xC0000000) BAD_POOL_HEADER

CPUID: GenuineIntel 5.2.c irql:1f   SYSVER 0xf0000565

Dll Base DateStmp - Name Dll Base DateStmp - Name
80100000 3202c07e - ntoskrnl.exe 80010000 31ee6c52 - hal.dll
80001000 31ed06b4 - atapi.sys 80006000 31ec6e74 - SCSIPORT.SYS

Restart and set the recovery options in the system control panel or the /CRASHDEBUG system start option.


01010111 01101001 01101110 01100100 01101111 01110111 01110011

A fatal exception 0E has occurred at 0028:C0011E36 in VXD VMM(01) + 000010E36. The current application will be terminated.

  • Press any key to terminate the current application
  • Press CTRL+ALT+DEL again to restart your computer. You will lose any unsaved information in all open applications.

Press any key to continue _


*** STOP: 0x0000007B (0xF201B84C,0xC0000034,0x00000000,0x00000000)
INACCESSIBLE_BOOT_DEVICE

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

Refer to your Getting Started manual for more information on troubleshooting Stop errors.


A problem has been detected and Windows has been shut down to prevent damage to your computer.

The problem seems to be caused by the following file: SPCMDCON.SYS

PAGE_FAULT_IN_NONPAGED_AREA

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical Information:

*** STOP: 0x00000050 (0xFD3094C@,0x00000001,0xFBFE7617,0x00000000)


*** SPCMDCON.SYS - Address FBFE7617 base at FBFE5000, DateStamp 3d6dd67c


17

STOP: 0x00000019 (0x00000000,0xC00E0FF0,0xFFFFEFD4,0xC0000000) BAD_POOL_HEADER

CPUID: GenuineIntel 5.2.c irql:1f   SYSVER 0xf0000565

Dll Base DateStmp - Name Dll Base DateStmp - Name
80100000 3202c07e - ntoskrnl.exe 80010000 31ee6c52 - hal.dll
80001000 31ed06b4 - atapi.sys 80006000 31ec6e74 - SCSIPORT.SYS

Restart and set the recovery options in the system control panel or the /CRASHDEBUG system start option.


W1nd0w5

A fatal exception 0E has occurred at 0028:C0011E36 in VXD VMM(01) + 000010E36. The current application will be terminated.

  • Press any key to terminate the current application
  • Press CTRL+ALT+DEL again to restart your computer. You will lose any unsaved information in all open applications.

Press any key to continue _


*** STOP: 0x0000007B (0xF201B84C,0xC0000034,0x00000000,0x00000000)
INACCESSIBLE_BOOT_DEVICE

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

Refer to your Getting Started manual for more information on troubleshooting Stop errors.


A problem has been detected and Windows has been shut down to prevent damage to your computer.

The problem seems to be caused by the following file: SPCMDCON.SYS

PAGE_FAULT_IN_NONPAGED_AREA

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical Information:

*** STOP: 0x00000050 (0xFD3094C@,0x00000001,0xFBFE7617,0x00000000)


*** SPCMDCON.SYS - Address FBFE7617 base at FBFE5000, DateStamp 3d6dd67c


AA

AAAA: AAAAAAAAAA (AAAAAAAAAA,AAAAAAAAAA,AAAAAAAAAA,AAAAAAAAAA) AAA_AAAA_AAAAAA

AAAAA: AAAAAAAAAAAA A.A.A AAAA:AA   AAAAAA AAAAAAAAAA

AAA AAAA AAAAAAAA - AAAA AAA AAAA AAAAAAAA - AAAA
AAAAAAAA AAAAAAAA - AAAAAAAA.AAA AAAAAAAA AAAAAAAA - AAA.AAA
AAAAAAAA AAAAAAAA - AAAAA.AAA AAAAAAAA AAAAAAAA - AAAAAAAA.AAA

AAAAAAA AAA AAA AAA AAAAAAAA AAAAAAA AA AAA AAAAAA AAAAAAA AAAAA AA AAA /AAAAAAAAAA AAAAAA AAAAA AAAAAA!


AAAAAAA!

A AAAAA AAAAAAAAA AA AAA AAAAAAAA AA AAAA:AAAAAAAA AA AAA AAA(AA) + AAAAAAAA! AAA AAAAAAA AAAAAAAAAAA AAAA AA AAAAAAAAAA!

  • AAAAA AAA AAA AA AAAAAAAAA AAA AAAAAAA AAAAAAAAAAA!
  • AAAAA AAAA+AAA+AAA AA AAAAAAA AAAA AAAAAAAA! AAA AAAA AAAA AAA AAAAAAA AAAAAAAAAAA AA AAA AAAAAAAAAAAA!

AAAAA AAA AAA AA AAAAAAAA _


*** AAAA: AAAAAAAAAA (AAAAAAAAAA,AAAAAAAAAA,AAAAAAAAAA,AAAAAAAAAA)
AAAAAAAAAAAA_AAAA_AAAAAA

AA AAAA AA AAA AAAAA AAAA AAA'AA AAAA AAAA AAAA AAAAA AAAAA, AAAAAAA AAAA AAAAAAAA! AA AAAA AAAAA AAAAAAA AAAAA, AAAAAA AAAAA AAAAA:

AAAAA AAA AAAAAAA AA AAAA AAAAAAAA! AAAAAA AAA AAAAA AAAAAAAAA AAAA AAAAAA AA AAAA AAAAA AAAAAAAAAAA! AAAAA AAAA AAAA AAAAA AA AAAA AAAA AA AA AAAAAAAA AAAAAAAAA AAA AAAAAAAAAA! AAA AAAAAA /A AA AAAAA AAA AAAA AAAAA AAAAAAAAAA, AAA AAAA AAAAAAA AAAA AAAAAAAA!

AAAAA AA AAAA AAAAAAA AAAAAAA AAAAAA AAA AAAA AAAAAAAAAAA AA AAAAAAAAAAAAAAA AAAA AAAAA!


A AAAAAAA AAA AAAA AAAAAAAA AAA AAAAAAA AAA AAAA AAAA AAAA AA AAAAAAA AAAAAA AA AAAA AAAAAAAA!

AAA AAAAAAA AAAAA AA AA AAAAAA AA AAA AAAAAAAAA AAAA: AAAAAAAA.AAA

AAAA_AAAAA_AA_AAAAAAAA_AAAA

AA AAAA AA AAA AAAAA AAAA AAA'AA AAAA AAAA AAAA AAAAA AAAAA, AAAAAAA AAAA AAAAAAAA! AA AAAA AAAAA AAAAAAA AAAAA, AAAAAA AAAAA AAAAA:

AAAAA AA AAAA AAAA AAA AAA AAAAAAAA AA AAAAAAAA AA AAAAAAAA AAAAAAAAA! AA AAAA AA A AAA AAAAAAAAAAAA, AAA AAAA AAAAAAAA AA AAAAAAAA AAAAAAAAAAAA AAA AAA AAAAAAA AAAAAAA AAA AAAAA AAAA!

AA AAAAAAAA AAAAAAAAA, AAAAAAA AA AAAAAA AAA AAAAA AAAAAAAAA AAAAAAAA AA AAAAAAAA! AAAAAAA AAAA AAAAAA AAAAAAA AAAA AA AAAAAAA AA AAAAAAAAA! AA AAA AAAA AA AAA AAAA AAAA AA AAAAAA AA AAAAAAAA AAAAAAAAAA, AAAAAAA AAAA AAAAAAAA, AAAAA AA AA AAAAAA AAAAAAAA AAAAAAA AAAAAAA, AAA AAAA AAAAAA AAAA AAAA!

AAAAAAAAA AAAAAAAAAAA:

*** AAAA: AAAAAAAAAA (AAAAAAAAAA,AAAAAAAAAA,AAAAAAAAAA,AAAAAAAAAA)


*** AAAAAAAA.AAA - AAAAAAA AAAAAAAA AAAA AA AAAAAAAA, AAAAAAAAA AAAAAAAA


en

STOP: 0x00000019 (0x00000000,0xC00E0FF0,0xFFFFEFD4,0xC0000000) BAD_POOL_HEADER

CPUID: GenuineIntel 5.2.c irql:1f   SYSVER 0xf0000565

Dll Base DateStmp - Name Dll Base DateStmp - Name
80100000 3202c07e - ntoskrnl.exe 80010000 31ee6c52 - hal.dll
80001000 31ed06b4 - atapi.sys 80006000 31ec6e74 - SCSIPORT.SYS

Restart and set the recovery options in the system control panel or the /CRASHDEBUG system start option.


Windows

A fatal exception 0E has occurred at 0028:C0011E36 in VXD VMM(01) + 000010E36. The current application will be terminated.

  • Press any key to terminate the current application
  • Press CTRL+ALT+DEL again to restart your computer. You will lose any unsaved information in all open applications.

Press any key to continue _


*** STOP: 0x0000007B (0xF201B84C,0xC0000034,0x00000000,0x00000000)
INACCESSIBLE_BOOT_DEVICE

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

Refer to your Getting Started manual for more information on troubleshooting Stop errors.


A problem has been detected and Windows has been shut down to prevent damage to your computer.

The problem seems to be caused by the following file: SPCMDCON.SYS

PAGE_FAULT_IN_NONPAGED_AREA

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical Information:

*** STOP: 0x00000050 (0xFD3094C@,0x00000001,0xFBFE7617,0x00000000)


*** SPCMDCON.SYS - Address FBFE7617 base at FBFE5000, DateStamp 3d6dd67c